Intelligent Scraper and Crown Scraper are sold all over the world. Chain Plate Scraper, Magnetic Scr

Guangdong Quanguan Intelligent Technology Co., Ltd. specializes in the production of chain plate chip removal machine, magnetic chip removal machine, scraper chip removal machine, screw chip removal machine, integrated water tank screw chip removal machine, composite water tank chip removal machine, etc., specializing in all parts of the world, to the world.

The following section explains the matters needing attention in the use of magnetic chip removal machine for you:

1. Attention should be paid to semi-dry and non-wet iron scraps. The magnetic chip removal machine of machine tool is particularly difficult to deal with such iron chips. The usual method is to completely turn this kind of iron chips into wet type, and then design the chip removal machine according to wet processing. In the chip removal system, sometimes there will be a coolant machine tool to be treated separately, so that it does not mix into the chip removal line.

2. The discharge capacity of magnetic chip remover of machine tool is not the bigger the better. The main reasons affecting chip removal are rotational speed, effective chip removal width, magnetic block spacing or scraper spacing. When the discharge width and spacing (specifications and models) are fixed, the increase or fall of rotational speed determines the size of chip removal, so chip removal will increase wear.

3. Each power head of plate-tape magnetic and caterpillar chain chip removal machine can achieve 42m without overlap, but considering the actual situation of installation, it generally does not exceed 30m, and power head should be added beyond this range. The larger length of other types is limited (except for large flow rinsing).

Okay, Xiaobian briefly introduced the matters needing attention in the use of our magnetic chip removal machine today. If you want to know more about the chip removal machine, you can pay attention to our official website.